Premium Essay

Ccna Labs

In: Computers and Technology

Submitted By mwanwanji
Words 4941
Pages 20
Phase 1: Identifying Requirements, Putting the Network Together

Scenario

NuggetLabs Industries is growing significantly. Due to space limitations, five employees currently share single cubicles…at the same time. While this is great for team building, these space limitations are now impacting business productivity. NuggetLabs has now leased an additional office building roughly 20Km from their headquarters location. While this office will eventually connect to the HQ office, it will initially be set up independently. NuggetLabs Industries has heard rumors of your ninja-like network consultation skills and has agreed to pay you an excessive amount of money to design and build their network infrastructure.

Gathering Information

To help guide this initial configuration, you‘ve assembled a list of requirements based on various meetings with management.

* The new office will initially house 75 employees, each with their own Cisco IP Phone and PC. This office may eventually scale to 200 employees over 5 years. * The Windows admins are planning to install a new pair of redundant servers at the new office. They plan to manage all the IP addresses for DHCP on these servers and are waiting for you to tell them what IP address range they should use. * Windows admins: Jeff Service - (602) 555-1293, Mike Pack (480) 555-9382. * The new office is a two story building with the Main Distribution Frame (MDF) in the northwest corner of the first floor. Because of a workman’s strike, poor planning, and other human issues, the Intermediate Distribution Frame (IDF) on the second floor was installed in the southeast corner of the second floor, beyond the reach of typical Ethernet standards. The majority of the employees (roughly 50) will sit on the main floor while the remainder will sit on the second floor. The building contractor has already run the…...

Similar Documents

Premium Essay

E Switching Lab Ccna

...tch Lab 4.4.2 VTP Configuration Challenge Topology [pic] Addressing Table |Device |Interface |IP Address |Subnet Mask |Default Gateway | |(Hostname) | | | | | |S2 |VLAN 99 |172.17.99.12 |255.255.255.0 |N/A | |S3 |VLAN 99 |172.17.99.13 |255.255.255.0 |N/A | |PC1 |NIC |172.17.10.1 |255.255.255.0 | | |PC2 |NIC |172.17.20.1 |255.255.255.0 | | |PC3 |NIC |172.17.30.1 |255.255.255.0 | | |PC4 |NIC |172.17.10.2 |255.255.255.0 | | |PC5 |NIC |172.17.20.2 |255.255.255.0 | | |PC6 |NIC |172.17.30.2 |255.255.255.0 | | Port......

Words: 1364 - Pages: 6

Premium Essay

Ccna

...CCNA Notes Introduction Cisco offers two options for obtaining the CCNA certification:   Pass Exam 640-802 OR Pass Exam 640-822 AND Exam 640-816 While you can use these notes to prepare for either exam, the notes are geared towards passing the single exam. I recommend you study all of the material and take the single exam option rather than taking two exams. Cisco Device Icons  The following table lists the specific icons Cisco uses to represent network devices and connections. Represents Icon Hub Bridge Switch Router Access point Network cloud Ethernet connection Serial Line connection Wireless connection Virtual Circuit The OSI Model As you study this section, answer the following questions:       What is the OSI model and why is it important in understanding networking? How does the third OSI model layer relate to administering routers? Which OSI model layer is concerned with MAC addresses? What protocols correspond to the Presentation and Session layers? What is the difference between the TCP and UDP protocols? What is the EIA/TIA 232 protocol concerned with? This section covers the following exam objectives:    103. Use the OSI and TCP/IP models and their associated protocols to explain how data flows in a network 105. Describe the purpose and basic operation of the protocols in the OSI and TCP models 110. Identify and correct common network problems at layers 1, 2, 3 and 7 using a layered model......

Words: 73801 - Pages: 296

Free Essay

Ccna 1 Chapter 4 Study Materials

...1. [pic] ccna 1 chapter 4 answers 100% 2011 Refer to the exhibit. What two pieces of information can be determined from the output that is shown? (Choose two.) The local host is using three client sessions. The local host is using web sessions to a remote server. The local host is listening for TCP connections using public addresses. The local host is using well-known port numbers to identify the source ports. The local host is performing the three-way handshake with 192.168.1.101:1037. 2. After a web browser makes a request to a web server that is listening to the standard port, what will be the source port number in the TCP header of the response from the server? 13 53 80 1024 1728 3. Which information is found in both the TCP and UDP header information? sequencing flow control acknowledgments source and destination 4. Which is an important characteristic of UDP? acknowledgement of data delivery minimal delays in data delivery high reliability of data delivery same order data delivery 5. [pic] ccna 1 chapter 4 answers 100% 2011 Refer to the exhibit. Host A is using FTP to download a large file from Server 1. During the download process, Server 1 does not receive an acknowledgment from Host A for several bytes of transferred data. What action will Server 1 take as a result? create a Layer 1 jam signal reach a timeout and resend the data that needs to be acknowledged send a RESET bit to the host change the window size in the Layer 4 header 6. ...

Words: 1109 - Pages: 5

Premium Essay

Ccna 3 Pt Lab Manual

...This document is exclusive property of Cisco Systems, Inc. Permission is granted to print and copy this document for non-commercial distribution and exclusive use by instructors in the CCNA Exploration: LAN Switching and Wireless course as part of an official Cisco Networking Academy Program. PT Activity 1.2.4: Build a Hierarchical Topology Topology Diagram Learning Objectives • • Add devices to a topology. Connect the devices. Introduction Packet Tracer is integrated throughout this course. You must know how to navigate the Packet Tracer environment to complete this course. Use the tutorials if you need a review of Packet Tracer fundamentals. The tutorials are located in the Packet Tracer Help menu. This activity focuses on building a hierarchical topology, from the core to the distribution and access layers. All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 3 CCNA Exploration LAN Switching and Wireless: LAN Design PT Activity 1.2.4: Build a Hierarchical Topology Task 1: Add Devices to the Topology Step 1. Add the missing distribution layer routers. The routers you need are located in Custom Made Devices. R1 and R3 are 1841 routers. Ctrl-click the 1841 router to add more than one. Press ESC to cancel. R2 is a 2621XM router. Step 2. Add the remaining access layer switches. Following the topology diagram, add nine 2960-24TT switches to complete the rest of the......

Words: 48601 - Pages: 195

Free Essay

Ccna Ch 4

...CCNA 1 Chapter 4 V4.0 Answers Posted in CCNA 1 - Network Fundamentals (V4.0) - 5 March 2010 - 1 comment - 188,626 views 1 Refer to the exhibit. What two pieces of information can be determined from the output that is shown? (Choose two.) The local host is using three client sessions. The local host is using web sessions to a remote server. The local host is listening for TCP connections using public addresses. The local host is using well-known port numbers to identify the source ports. The local host is performing the three-way handshake with 192.168.1.101:1037. 2. After a web browser makes a request to a web server that is listening to the standard port, what will be the source port number in the TCP header of the response from the server? 13 53 80 1024 1728 3. Which information is found in both the TCP and UDP header information? sequencing flow control acknowledgments source and destination 4. Which is an important characteristic of UDP? acknowledgement of data delivery minimal delays in data delivery high reliability of data delivery same order data delivery 5. Refer to the exhibit. Host A is using FTP to download a large file from Server 1. During the download process, Server 1 does not receive an acknowledgment from Host A for several bytes of transferred data. What action will Server 1 take as a result? create a Layer 1 jam signal reach a timeout and resend the......

Words: 973 - Pages: 4

Free Essay

Ccna Routing

...American International University–Bangladesh Continuing Education Center (CEC)  02 8816173 Ext 406  www.cec.aiub.edu CCNA Routing and Switching Course Outline CCENT Introduction to Networks Routing & Switching Essentials Scaling Networks Connecting Networks CCNA CCNA 1 – Introduction to Networks This course introduces the architecture, structure, functions, components, and models of the Internet and other computer networks. The principles and structure of IP addressing and the fundamentals of Ethernet concepts, media, and operations are introduced to provide a foundation for the curriculum. By the end of the course, students will be able to build simple LANs, perform basic configurations for routers and switches, and implement IP addressing schemes. Chapter 1 2 3 4 5 6 7 8 9 10 11 Topic Exploring the Network Configuring a Network Operating System Network Protocols and Communications Network Access Ethernet Network Layer Transport Layer IP Addressing Subnetting IP Networks Application Layer It’s a Network Students who complete Introduction to Networks will be able to perform the following functions:  Understand and describe the devices and services used to support communications in data networks and the Internet  Understand and describe the role of protocol layers in data networks  Understand and describe the importance of addressing and naming schemes at various layers of data networks in IPv4 and IPv6 environments  Design, calculate, and apply......

Words: 1022 - Pages: 5

Free Essay

Student Ccna Syllabus

...Study Guide CISCO SYSTEMS NETWORKING Academy CCNA 2 Chapter 1 WANs and Routers One major characteristic of a wide-area network (WAN) is that the network operates beyond the local LAN's geographic scope. It uses the services of carriers, such as regional Bell operating companies (RBOCs), Sprint, and MCI. WANs use serial connections of various types to access bandwidth over wide-area geographies. By definition, the WAN connects devices that are separated by wide areas. WAN devices include the following: • • • • • • Routers, which offer many services, including internetworking and WAN interface ports Switches, which connect to WAN bandwidth for voice, data, and video communication Modems, which interface voice-grade services and channel service units/digital service units Channel service units/data service units (CSUs/DSUs) that interface T1/E1 services and Terminal Adapters/Network Termination 1 (TA/NT1s) TA/NT1s that interface Integrated Services Digital Network (ISDN) services Communication servers, which concentrate on dial-in and dial-out user communication Concept Questions 1. A WAN is used to interconnect local-area networks (LANs) that are typically separated by a large geographic area. A WAN operates at the OSI reference model physical and data link layers. The WAN provides for the exchange of data packets/frames between routers/bridges and the LANs that they support. Draw a WAN that includes three LANs. 1 of 116 CCNA 2 Chapter 1 WANs and Routers 2. Compare and......

Words: 23437 - Pages: 94

Free Essay

Ccna

...CCNA 1 Chapter 1 V4.0 1. Which of the following descriptions are true regarding the management connections on a Cisco router? (Choose three.) They are non-network connections. They are used to connect the router to the rest of the production network. They are synchronous serial ports. They are used for initial router configuration. They are asynchronous serial ports. They are accessed using their assigned IP address. 2. The console port can be used for which of the following? (Choose three.) debugging. password recovery. routing data between networks. troubleshooting. connecting one router to another. 3. Which of the following describes the function of a WAN? connects peripherals in a single location. connects multiple networks in a single building. provides connectivity on a LAN. provides connectivity over a large geographic area. 4. An internetwork must include which of the following? (Choose three.) switching. static addressing. IETF standardization. dynamic or static routing. consistent end-to-end addressing. 5. ABC Company just purchased three new routers to start their company network. Which items are needed to establish a terminal session between a PC and the router for the initial configuration? (Choose three.) straight-through cable. terminal emulation software. rollover cable. RJ-45 to DB-9 connector. V.35 cable. 6. Terminal emulation software, such as HyperTerminal, can be used to configure a router. Which of the following......

Words: 1042 - Pages: 5

Free Essay

Ccna2 Lab

...Lab L - Initializing and Re g eloading a Rout and S g ter Switch (Instructo or Version) V Instructor No Red font color or Gray highlights ind ote: y dicate text tha appears in the instructor copy only. at Topology T Objectives O Part 1: Se Up Device in the Netw et es work as Show in the To wn opology Part 2: Initialize the Router and Reload R Part 3: Initialize the Switch and Reload S Backgroun / Scenar B nd rio Before sta arting a CCNA hands-on la that makes use of either a Cisco rout or switch, ensure that t A ab s ter the devices in use have be erased an have no st n een nd tartup configu urations prese Otherwise the results of your ent. e, lab may b unpredictab This lab p be ble. provides a de etail procedure for initializin and reload e ng ding a Cisco ro outer and a Cisco sw witch. Note: The routers used with CCNA hands-on lab are Cisco 1 e d bs 1941 Integrate Services R ed Routers (ISRs with s) Cisco IOS Release 15. S .2(4)M3 (univ versalk9 image). The switches used are Cisco Cataly 2960s with Cisco yst h IOS Relea 15.0(2) (lanbasek9 ima ase age). Other ro outers, switch hes, and Cisc IOS version can be use co ns ed. Depending on the mod and Cisco IOS version, the comman available a output pr del nds and roduced migh vary ht from what is shown in the labs. t t Required R R Resources • • • • 1 Rou (Cisco 19 with Cisco IOS softwar Release 15.2(4)M3 universal image or comparab uter 941 o re, ble) 1 Switch (Cisco 29 with Cisco IOS Release 15.0(2) lanb 960 o...

Words: 1278 - Pages: 6

Premium Essay

Ccna Chapter 6

...280 prefix aggregation page 285 network prefix page 286 contiguous page 294 discontiguous address assignment page 280 supernet page 280 private addressing page 281 high-order bits page 282 supernetting page 294 This is a prepublication draft of the manuscript. The final book will publish in December and will be available for purchase at http://www.ciscopress.com/title/9781587132063. raft Manuscript Draft Ma cript Draft Manuscript Dra Manuscript Draft Manuscri raft Manuscript Draft Ma uscript Draft Manuscript raft Manuscript Draft Ma script Draft Manuscript D ft Manuscript Draft Manu ript Draft Manuscript Dra Manuscript Draft Manuscri t Draft Manuscript Draft M nuscript Draft Manuscript 280 Routing Protocols and Concepts, CCNA Exploration Companion Guide Prior to 1981, IP addresses used only the first 8 bits to specify the network portion of the address, limiting the Internet—then known as ARPANET—to 256 networks. Early on, it became obvious that this was not going to be enough address space. In 1981, RFC 791 modified the IPv4 32-bit address to allow three different classes or sizes of the networks: ■ ■ ■ Class A addresses, which used 8 bits for the network portion of the address Class B addresses, which used 16 bits for the network portion of the address Class C addresses, which used 24 bits for the network portion of the address This format became known as classful IP addressing. The initial development of classful addressing solved the......

Words: 10468 - Pages: 42

Free Essay

Labs

...Tissues The Integumentary System 35 43 The Cell: Transport Mechanisms and Permeability–Wet Lab Classification of Covering and Lining Membranes 49 Overview of the Skeleton: Classification and Structure of Bones and Cartilages 53 The Axial Skeleton The Fetal Skeleton 59 67 81 87 93 103 77 The Appendicular Skeleton Articulations and Body Movements Microscopic Anatomy and Organization of Skeletal Muscle Gross Anatomy of the Muscular System Histology of Nervous Tissue 113 119 125 Exercise 16A Skeletal Muscle Physiology: Frogs and Human Subjects Exercise 18A Neurophysiology of Nerve Impulses: Wet Lab Gross Anatomy of the Brain and Cranial Nerves Electroencephalography Human Reflex Physiology General Sensation 153 157 167 177 173 Special Senses: Vision 133 Spinal Cord, Spinal Nerves, and the Autonomic Nervous System 145 137 Special Senses: Hearing and Equilibrium Special Senses: Olfaction and Taste Functional Anatomy of the Endocrine Glands iii Exercise 28A Role of Thyroid Hormone, Pituitary Hormone, Insulin, and Epinephrine: Wet Lab 183 Exercise 29A Blood Exercise 30 Exercise 31 Exercise 32 189 199 205 209 Anatomy of the Heart Conduction System of the Heart and Electrocardiography Anatomy of Blood Vessels Exercise 33A Human Cardiovascular Physiology: Blood Pressure and Pulse Determinations 217 Exercise 34A Frog Cardiovascular Physiology: Wet Lab Exercise 36 Exercise 38 Exercise 40 Exercise 42 Exercise 43 Exercise 44 Exercise 45 Exercise......

Words: 120457 - Pages: 482

Free Essay

Labs

...© Jones & Bartlett Learning, LLC NOT FOR SALE OR DISTRIBUTION © Jones & Bartlett Learning, LLC NOT FOR SALE OR DISTRIBUTION © Jones Bartlett Lab #2© Jones &SALE ORLearning, LLC Vulnerabilities to &SALE ORLearning, LL AligningBartlett DISTRIBUTION Risks, Threats, and NOT FOR DISTRIBUT NOT FOR COBIT P09 Risk Management Controls © Jones & Bartlett Learning, LLC Introduction © Jones & Bartlett Learning, LLC NOT FOR SALE OR DISTRIBUTION NOT FOR SALE OR DISTRIBUTION Ask any IT manager about the challenges in conveying IT risks in terms of business risks, or about translating business goals into IT goals. It’s a common difficulty, as the worlds of business and IT do not inherently align. This lack of alignment was unresolved until ISACA developed a framework called COBIT, © Jones & Bartlett Learning, LLC first released in 1996.Jones & Bartlett Learning, LLC © ISACA is an IT professionals’ association centered on auditing and IT governance. This NOT FOR SALE OR DISTRIBUTION The lab lab will focus on the COBIT framework. NOT FOR SALE OR DISTRIBUTION uses the latest two versions: COBIT 4.1, which is currently the most implemented version, and COBIT 5, which is the latest version released in June 2012. Because COBIT 4.1 is freely available at the time of this writing, the lab uses this version to © Jones & Bartlett Presentation is done making use of a © Jones & Bartlett Learning, LL present handling of risk management. Learning, LLC set of COBIT......

Words: 2487 - Pages: 10

Free Essay

Ccna R&S Lab 2.1.1.6

...Lab 2.1.1.6 Part 1 Step 1 b: Cable the Network and Verify the Default Switch Configuration Why must you use a console connection to initially configure the switch? Why is it not possible to connect to the switch via Telnet or SSH? Because the initial configuration must be made using console port for the first time, it is the only way to activate all port and protocols requires to enable SSH. Step 2 b: Verify the default switch configuration. How many FastEthernet interfaces does a 2960 switch have? 24 FastEthernet Ports How many Gigabit Ethernet interfaces does a 2960 switch have? 2 GigabitsEthernet Ports What is the range of values shown for the vty lines? Line vty 5 to 15 Step 2 c: Examine the startup configuration file in NVRAM Why does this message appear? Because there is not saved configuration. Step 2 d: Examine the characteristics of the SVI for VLAN 1. Is there an IP address assigned to VLAN 1? No What is the MAC address of this SVI? 0022.569b.4540 Is this interface up? Vlan1 is up, line protocol is down Step 2 e: Examine the IP properties of the SVI VLAN 1. What output do you see? Internet protocol processing disabled Step 2 f: Connect PC-A Ethernet cable to port 24 on the switch and examine the IP properties of the SVI VLAN 1. What output do you see? Vlan1 is up, line protocol is up / Internet protocol processing disabled Step 2 g: Examine the Cisco IOS version information of the switch. What is the Cisco IOS version that the......

Words: 1124 - Pages: 5

Premium Essay

Ccna

... CCNA Portable Command Guide Second Edition Scott Empson Cisco Press 800 East 96th Street Indianapolis, Indiana 46240 USA ii CCNA Portable Command Guide, Second Edition Scott Empson Copyright© 2008 Cisco Systems, Inc. Published by: Cisco Press 800 East 96th Street Indianapolis, IN 46240 USA All rights reserved. No part of this book may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system, without written permission from the publisher, except for the inclusion of brief quotations in a review. Printed in the United States of America First Printing July 2007 Library of Congress Cataloging-in-Publication Data Empson, Scott. Portable command reference / Scott Empson. -- 2nd ed. p. cm. ISBN 978-1-58720-193-6 (pbk.) 1. Computer networks--Examinations--Study guides. 2. Internetworking (Telecommunication)--Examinations--Study guides. 3. Electronic data processing personnel--Certification. I. Title. TK5105.5.E4352 2007 004.6--dc22 2007023863 ISBN-13: 978-1-5872-0193-6 ISBN-10: 1-58720-193-3 Warning and Disclaimer This book is designed to provide information about the Certified Cisco Networking Associate (CCNA) exam and the commands needed at this level of network administration. Every effort has been made to make this book as complete and as accurate as possible, but no warranty or fitness is implied. The information is......

Words: 64092 - Pages: 257

Premium Essay

Ccna

...table that is shown in the exhibit, what will Host1 do? www.CertificationKing.com - 13 - A. B. C. D. send a unicast ARP packet to the DSL modem/router send unicast ICMP packets to the DSL modem/router send Layer 3 broadcast packets to which the DSL modem/router responds send a Layer 2 broadcast that is received by Host2, the switch, and the DSL modem/router Answer: B Q: 17 Refer to the exhibit. What is the most efficient summarization that R1 can use to advertise its networks to R2? A. 172.1.0.0/22 B. 172.1.0.0/21 C. 172.1.4.0/22 www.CertificationKing.com - 14 - D. 172.1.4.0/24 172.1.5.0/24 172.1.6.0/24 172.1.7.0/24 E. 172.1.4.0/25 172.1.4.128/25 172.1.5.0/24 172.1.6.0/24 172.1.7.0/24 Answer: C Q: 18 LAB www.CertificationKing.com - 15 - www.CertificationKing.com - 16 - A. Router>en Router#config terminal Router(config)#hostname Weaver Router(config)#ip nat pool test 198.18.184.105 198.18.184.110 netmask 255.255.255.248 Router(config)#ip nat inside source list 1 pool test Router(config)#access-list 1 permit 192.168.100.16 0.0.0.15 Router(config)#int s0/0 Router(config-if)#ip nat outside Router(config-if)#exit Router(config-if)#int fa0/0 Router(config-if)#ip nat inside Answer: A Q: 19 Which spread spectrum technology does the 802.11b standard define for operation? A. B. C. D. E. IR DSSS FHSS DSSS and FHSS IR, FHSS, and DSSS Answer: B Q: 20 Refer to the exhibit. Assume that all router interfaces......

Words: 5081 - Pages: 21